1.
2.
3.
4.
1.
2.
3.
1.
2.
1.
2.
3.
3. Press
or
or press the Send soft key, then the call is sending.
To place a call by call history or Directory
1. Press the History/ DIR soft key (On the idle page) or Menu History /Directory
2. Press
and
to select the targeted one.
3. Press the Send soft key, or
, or
, or the corresponding line key, then the call is sending.
Note:
1. The
key is set to be a send key. For more information, refer to the Key as Send on page
2. During the call, you can also change among Headset, Handset or Free-speaker mode.
Making two calls with one line and one account
Press a line key and dial phone number, then make a call.
Press Hold soft key and then press New Call soft key.
Dial another phone number,
Press the Send soft key, or
, then make the second call.
End a Call
Here shows to end a call during three modes:
To end a call by Handset
Press the End Call soft key or hang up the handset, or press
To end a call under Headset Mode
Press the End Call soft key or press
, or press
.
To end a call under hands-free speakerphone Mode
Press the End Call soft key or press
, or press
.
Note:
During the conference, to end the call is same as mentioned above.
Receive a Call
There are three ways to receive a call when the phone is ringing:
To receive a call by handset
Pick up the handset and now the conversation is built.
To receive a call by headset
Press
and now the conversation is built.
To receive a call by hands-free speaker
1. Option 1: Press
directly.
2. Option 2: Press Answer soft key.
3. Option 3: Press the Line key (flashes red).
Moreover, some other action can be done by soft key when the call is coming.
Press the Reject soft key to reject the call. Or press
to reject the current call.
Press Forward soft key to forward to another phone.
Press Silence soft key, and then the call will keep silent, no ring tone display.
Incoming Call Show Mode
There are two incoming call show modes for this phone:
name and number of the contacts
name and number of the incoming call and the account which is connecting
To set incoming call show mode via Web interface:
Click Setting Preference
Select the desire mode for the incoming call show mode
45
