1.
2.
3.
1.
2.
3.
1.
2.
1.
2.
3.
1.
2.
3.
1.
2.
3.
If you set IP Mode to IPv4&IPv6,IP phone will support both IPv4 and IPv6 address. The settings of DHCP, Static, and PPPoE are same as above.
To configure IPv4&IPv6 via Phone interface:
Press Menu Settings Advanced Setting (password: admin) Network WAN Port IP Port Mode.
Press
or
to change the IP Port Mode..
Press
or Save soft key to save the configuration.
To configure IPv4&IPv6 via Web interface:
Click Network Basic Internet Port
Select IPv4&IPv6 for Internet Port
Click
for the setting.
Note:
Wrong network parameters may result in inaccessibility of your phone and may also have an impact on your network performance. For more
information about these parameters, contact your system administrator.
PC Port
Two modes for PC port: bridge and router.
To configure PC Bridge via Phone interface:
Press Menu Settings Advanced Setting (password: admin) Network PC Port Bridge mode.
Click Save and restart the phone.
To configure PC router via Phone interface:
Press Menu Settings Advanced Setting (password: admin) Network PC Port Router mode.
Enter the IP, Netmask and DHCP server
Click Save and restart the phone.
To configure Bridge via Web interface:
Click Network PC Port
Select As Bridge.
Click
and restart the phone
To configure Router via Web interface:
Click Network PC Port
Select As Router
Fill the IP address and other necessary information.
28
IPv4&IPv6
