Axopar 22 SPYDER Owner'S Manual Download

Page: 20 / 118

4. Product description

the toilet and can be accessed by opening the toilet front wall. The bilge water level should remain at a

minimum.
The output of each automatic bilge pump is 50 liters (13.3 gallons) per minute. The manual bilge pump’s

output is 35 liters (9.2 gallons) per minute.

CAUTION

Avoid pollution!
Since the bilge system comprises of several automatic and manual pumps that

cover all areas of the boat, the risk of accidental discharge of contaminated water

by automatic pumps should be minimized. The boat owner and user shall mitigate

the risk by checking the bilge water regularly for contaminants such as oil, diesel,

and glycol. There is a sign in the boat indicating the draining area of each pump

respectively.

CAUTION

Do not run dry for long time. The pump will be damaged.

WARNING

• Check the functionality of the bilge pumps regularly by manually

activating them.

• Remove any waste from the intakes.

The combined capacity of the bilge system is not designed to pump out the boat

in the event of hull damage.
The pumps are by default in the automatic mode and pump out the bilge once the

float-switch is triggered. The pumps can also be started manually from the boat’s

main control panel.

CAUTION

The bilge system is not designed for damage control.

WARNING

Check the function of all bilge pumps at regular intervals. Clear pump outlets from

debris.
If seacocks are fitted in the fore and aft peak bulkheads, they shall be kept closed

and shall only be opened to let water drain into the main bilges.

Axopar 22 Spyder

Document ID: 22S202103EN

Owner's Manual

Page 19

Summary of Contents for 22 SPYDER























































































































Search results

Summary of Contents for 22 SPYDER

Reviews:

Related manuals for 22 SPYDER

Brands by name

Popular brands

Axopar 22 SPYDER, Owner'S Manual

Search results

Summary of Contents for 22 SPYDER

Reviews:

Related manuals for 22 SPYDER

Brands by name

Popular brands