Axopar 22 SPYDER Owner'S Manual Download | Manualshive

Page: 29 / 118

background image

4. Product description

WARNING

• Never block access to safety equipment, fire extinguishers, fuel valves or

main power switches.

• Never block any ventilation openings made in the boat because their

purpose is to clear the air of fuel fumes.

• Never use a wrong type of fuel in the heater or cooker as this may

damage them.

• Never use an open flame when detecting leaks.

4.3. Optional equipment

This section presents the optional equipment and systems available for the boat.

4.3.1. Fresh water system

You can choose to equip your boat with a fresh water system as an optional extra.
The fresh water system consists of a fresh water tank and pump. The boat may also be equipped with a

water supply point in the toilet and in the deck shower.
The tank is located under aft deck. The pump is integrated in the tank. The fresh water tank is filled via

the inlet pipe on the aft foredeck.
The fresh water system is turned on by switching on the fresh water pump. The pump switch is located

on the fuse panel.
The system maintains a working pressure automatically, which is why the pump does not need to be shut

after use.
Switch the system off when leaving the boat. Do not forget to check filter in the pump regularly.
The dealer is responsible for disinfecting the fresh water tank before sale.

NOTICE

The fresh water system must be thoroughly emptied for winter storage. It is not

recommended to use any anti-freeze products in the fresh water system.

Axopar 22 Spyder

Document ID: 22S202103EN

Owner's Manual

© 2021 Axopar Boats

Page 28

-

-

«
...
27
28
29
30
31
...
»

Summary of Contents for 22 SPYDER























































































































Reviews:

No comments

Related manuals for 22 SPYDER

Brand: Four winns Pages: 134

Brand: Four winns Pages: 140

Brand: GALA Pages: 10

Brand: Yamaha Pages: 142

Brand: Yamaha Pages: 144

Brand: Yamaha Pages: 148

Brand: NW Explorations Pages: 63

Brand: Tanzer Pages: 49

Brand: Ockelbo Pages: 70

Brand: Feathercraft Pages: 31

Brand: Catalina Pages: 18

Brand: Yamaha Pages: 131

Brand: NorthStar Pages: 2

190 Outrage 2019

Brand: Boston Whaler Pages: 88

WaveRunner VX-C

Brand: Yamaha Pages: 214

Seaswirl Series

Brand: Striper Pages: 148

Brand: Per Brohall Pages: 34

Brand: Monterey Boats Pages: 254

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands