4. Product description
(1) Main switch panel
(2) Batteries
(3) Fuse panel
4.2.2. 12 V system
The boat is equipped with the 12 V system.
The 12 V system consists of engine driven alternators, batteries and equipment. The power supply
happens from charger or alternator via diodes for batteries.
The boat's equipment uses the 12 V system. To activate the circuits in the 12V system, the main
switches for the corresponding circuits need to be activated and the fuses intact. Damaged equipment
must be maintained before taking back to use. When the electronic circuit is switched on, the equipment
can be operated from the main switch panel.
WARNING
• Never switch off the main switch when the engine is running, because
this may cause damage to the alternator.
• Never carry out electrical installations when the power is switched on.
• Never modify the boat’s electrical system or diagrams; service and
maintenance must be carried out by a qualified electrician.
• Never modify the nominal rated amperage of the overvoltage protector.
• Never install or replace electrical equipment with components that cause
the circuit’s nominal rated amperage to be exceeded.
• Never leave the boat unattended with the electrical system energized,
except automatic bilge pump, fire protection, and alarm circuits.
4.2.3. Main switches
The different electronic circuits of the boat are controlled by the main switches on the distribution board.
Axopar 22 Spyder
Document ID: 22S202103EN
Owner's Manual
© 2021 Axopar Boats
Page 21
-
-
Summary of Contents for 22 SPYDER
Page 1: ...OWNER S MANUAL AXOPAR 22 SPYDER ...
Page 59: ......
