manualshive.com logo in svg

Axon Synapse DEE28, Installation And Operation Manual, Page: 46 / 49

Share
Download
Axon Synapse DEE28 Installation And Operation Manual Download Page 46

 

46 

 

 

The maximum amount of ADD-ON cards in Quad Speed mode is 3. These 
3 ADD-ON cards will run all on the same clock in the same phase as the 
MASTER-CARD. This guarantees that audio channels that are processed 
in different ADD-ON cards will still operate in the same phase, something 
very important when processing multiple discrete surround channels.

 

 

You can mix normal speed Master-Cards with Quad Speed MASTER-Cards 
in one frame as the MASTER-CARD breaks the connection to the left hand 
card. All cards to the right of the master must be in the same mode as the 
master. 

SLOT 01
MASTER

SLOT 02
ADD-ON

SLOT 03
ADD-ON

SLOT 16

MASTER

SLOT 17
ADD-ON

SLOT 18
ADD-ON

SYNAPSE 

BUS

SYNAPSE 

BUS

SYNAPSE 

BUS

SYNAPSE 

BUS

SYNAPSE 

BUS

SYNAPSE 

BUS

SYNAPSE 

BUS

SLOT 04

QS MASTER

SLOT 05

QS AD-ON

SLOT 06

QS AD-ON

 

Mixing normal ADD-ON with Quad Speed ADD-ON combo’s in one frame is allowed 

 

Some examples

 

This is an Example where we combine a MASTER-CARD that performs 
embedded domain Dolby E to Dolby Digital Plus encoding. Between the E-
decoding and Dolby Digital Plus encoding we want to watermark the left, 
right and center channel of a the decoded discrete 5.1 surround channels and 
watermark a PCM channel used as a voice over for audio description. 
 

 

Embedded domain Dolby E to Dolby Digital Plus with Watermarking. The only connection to the 
outside world are two BNC cables. 

 

Summary of Contents for Synapse DEE28


















































Reviews:

No comments