manualshive.com logo in svg

Axon Synapse DEE28, Installation And Operation Manual, Page: 44 / 49

Share
Download
Axon Synapse DEE28 Installation And Operation Manual Download Page 44

 

44 

Appendix 1  Quad speed ADD-ON bus 

 

 

 

The internal audio ADD-ON bus needed an upgrade for some applications. 
We wanted more channels (32 per video stream seem possible in the near 
future). And we want the bus to be bidirectional, so 32 channels in and 32 
channels out at the same time. 
 
The new interface needed to be compatible with all existing hardware 
(frames) and in the implementation of the master card it sometimes needed 
to be backward compatible with the original ADD-ON bus. 
 

 

So the MASTER-CARD is now firmware enhanced to run 32 channels in either direction (64 

channels total) instead of 16 channels in one direction 

 

 

Some MASTER-CARD’s will have two modes and some MASTER-
CARD’s will only have the Quad Speed mode [where the logical ADD-ON 
cards are only available in Quad Speed mode: 
 

Dual mode MASTER-CARD’s have a menu item to select the appropriate 
mode are. If a mode is selected all ADD-ON cards to that Master need to 
be in the same mode.  
 

The following features and rules will apply: 

 

Up to 32 channels output from the master card with looping to up to 3 
ADD-ON cards 

 

The ADD-ON card just picks the channels it wants to process 

 

Some ADD-ON cards will have the possibility to re-inject 
processed audio onto the next ADD-ON card  

 

Up to 32 channels input on the master card  

 

If the master card can handle less than 32 channels, the lowest 
channel numbers will be used, as the ADD-ON card will always 
generate 32 channels (where some channels can be empty or 
silent) 

 

Channel shuffling is done in the ADD-ON card 

 

The Master Card has only one setting to enable the quad speed 

Summary of Contents for Synapse DEE28


















































Reviews:

No comments