20
5.2 Instructions for Remote Control
A
Remote Control
can be used to start and stop the dust processor. The remote control
connects to the main controller of the dust processor through WIFI, and the effective control
distance is approximately 30 meters. When using the remote control, the operator does not need
to aim the remote control to the dust processor.
Fig. 11
For detailed operating instructions, please refer to the operation manual of the
Remote Control
.
5.3 Instructions for Synchronous Control
The user can achieve the synchronous operation of the dust processors and the dust source
equipment by using
Synchronized Control.
After a simple installation and setup, the start and
stop of the dust processors will automatically associate the dust source equipment.
Fig. 12
For detailed operating instructions, please refer to the operation manual of the
Synchronized
Control
.
Summary of Contents for G-800
Page 8: ...6 2 3 3 Electrical diagram Fig 2 Fig 2 ...
Page 28: ...26 Cabinet Assembly Exploded View ...
Page 35: ......
