12
4.3.5 Air Supply (compressed air)
Make sure the switch is in the “OFF” position before connecting to the compressor to
avoid an unexpected start.
Air pressure requirement should be at least 0.8MPa (115psi).
As shown in Fig. 8, follow the instruction below:
Inspect the oil water separator pressure valve. If it is not shown at 0.6MPa, please adjust it to
0.6MPa.
Close the drain valve under the gas container. (The handle is in the horizontal position).
Mount an 8mm air hose to the position pointed in Fig. 8.
Fig. 8
Congratulations!
You have completed assembly of this machine.
Summary of Contents for G-800
Page 8: ...6 2 3 3 Electrical diagram Fig 2 Fig 2 ...
Page 28: ...26 Cabinet Assembly Exploded View ...
Page 35: ......
