Assembly
7
Fig 11-12-13
4. Locate the ‘Graphite Pad’, (D) and peel off the adhesive
backing. Position the pad down onto the linishers platen
and press firmly down, see fig 11-12-13.
Note: After a period of time the ‘Graphite Pad’ will become worn
and we recommend fitting the optional ‘Slip Plate’, code 105676,
see picture below.
D
5. Slide the belt back on the drive rollers and centre the belt on
the linisher. Press the lever (2) down and hold in place, pull the
locking ‘PIN’ (3) out and raise the linisher’s head to re-tension
the belt, see fig 14.
6. Replace the side access plate (G)
3. Remove the belt and place safely aside, see fig 10.
Fig 10
Fig 14
3
2
WORK TABLE
NOT INCLUDED
