4
machine is placed securely on a flat, level surface, capable of supporting the weight
of the machine.
5.
If attaching the Air Filtration System to a ceiling, make sure the machine is attached
securely to joists capable of supporting the weight of the machine.
6.
Make sure the Switch is in the “Off” position before plugging in the power cord.
7.
Keep the Filter Net (1) and the Filter Bag (2) clean, in place, and in good working
order
.
8.
Always unplug the 3-SPEED AIR CLEANER from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.
9.
WARNING!
People with pacemakers should consult their physician(s) before using this
product. Operation of electrical equipment in close proximity to a heart pacemaker could
cause interference or failure of the pacemaker.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock. Check with a
qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not
modify the power cord plug provided with the product. Never remove the grounding prong
from the plug. Do not use the product if the power cord or plug is damaged. If damaged, have
it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician
.
GROUNDED PRODUCT: PRODUCTS WITH THREE PRONG PLUGS
1. Products marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If the product
should electrically malfunction or break down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk of electric shock.
(See Figure A.)
2. The grounding prong in the plug is connected through the green wire inside the cord to the
grounding system in the tool. The green wire in the cord must be the only wire connected to
the product’s grounding system and must never be attached to an electrically “live” terminal.
(See Figure A.)
3. Your product must be plugged into an appropriate outlet, properly installed and grounded in
accordance with all codes and ordinances. The plug and outlet should look like those in the
following illustration.
(See Figure A.)
EXTENSION CORDS
1.
Grounded
tools require a three wire extension cord.
Double Insulated
tools can use either
a two or three wire extension cord.
