background image

 

 

2

 

PRODUCT SPECIFICATIONS 

 
Motor…………………………………………………………… 1/5 HP, 110-120 V, 60 Hz, 1 Phase 
        …………………………………………………………or 1/5 HP, 230-240 V, 50 Hz, 1 Phase

 

Outer Filter …………………………………………………………………………………5 Microns 
Inner Filter …………………………………………………………………………………..1 Micron 
Sound Rating ………………………………………… High Speed - 68 dB, Low Speed - 63 dB 
Air Flow ….…….….High Speed 1044 CFM, 

Medium 

Speed 702CFM, Low Speed - 556 CFM 

Remote Control………………………………………. Requires 2 “AAA” Batteries (not included) 
 

GENERAL SAFETY RULES 

 

WARNING! 

 

READ AND UNDERSTAND ALL INSTRUCTIONS 

Failure to follow all instructions listed below may result in 

electric shock, fire, and/or serious injury. 

SAVE THESE INSTRUCTIONS 

 

WORK AREA 

 
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 
 
2. Do not operate electric products in explosive atmospheres, such as in the presence of 

flammable liquids, gases, or dust. 

 
3. Keep bystanders, children, and visitors away while mounting or maintaining the 3- speed 

air cleaner. 

 

ELECTRICAL SAFETY 

 
4. Grounded products must be plugged into an outlet properly installed and grounded in 

accordance with all codes and ordinances. Never remove the grounding prong or modify 
the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you 
are in doubt as to whether the outlet is properly grounded. If the product should be 
electrically malfunction or break down, grounding provides a low resistance path to carry 
electricity away from the user. 

 
5. Double insulated products are equipped with a polarized plug (one blade is wider than the 

other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the 
outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a 
polarized outlet. Do not change the plug in any way. Double insulation eliminates the need 
for the three wire grounded power cord and grounded power supply system. 

 
6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and 

refrigerators. There is an increased risk of electric shock if your body is grounded.   

 
7. Do not expose this product to rain or wet conditions. Water entering an electric product will 

increase the risk of electric shock. 

 
8. Do not abuse the Power Cord. Never use the Power Cord to carry the product or pull the 

Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving 
parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the 
risk of electric shock. 

 
 
 

Summary of Contents for AT25AFS











Reviews: