Axminster Craft AC82E, Original Instructions Manual

Page: 9 / 20

Assembly
9
12
13
14 10
• Turn the extractor assembly over again and remove the
four domed Hex screws (K) already mounted to unit and
place safely aside, see step 13-14.
• Turn the base assembly, see step 6 over. Line up the holes
in the upright support panels (C) with the mounting holes
on the extractor (A). Secure using the domed Hex screws (K)
you removed earlier with four flat washers (N) and spring
washers (P), see step 15-16-17.
K
K
11
K
15
C
K N P
Continues Over...
16
17