Axminster Craft AC250CM, Manual

Page: 55 / 56

Cutter Block Accessories
55
Two sizes of limiter cutter block, 78mm and 100mm,
both with 30mm bores, which designed to accept
the range of Euro cutters and limiters shown within
this section. The 78mm block is designed for use
with the 40 x 4mm Euro and Whitehill cutters,
whereas the 100mm block will accept both 40 x
4mm and 50 x 4mm Euro cutters plus the 40 x 4mm
and 55 x 4mm Whitehill cutters. For those who are
unfamiliar with spindle moulder tooling, limiters
are a safety device designed to limit the amount
of cut taken by the cutters on each rotation of the
block. They take the form of a dummy cutter with
the profile cut slightly below the cutter profile and
with the sharp edges removed. They fit into the
slots in the block in front of the main cutters and
are secured by the same wedge as the cutters. The
blocks are supplied with a pair of rebate knives and
limiters. The 100mm block is aluminium and the
78mm block is steel.
Axcaliber Euro Cutter Head
Euro Cutter Head - 78mm dia, 30mm bore
693078
Euro Cutter Head - 100mm dia, 30mm bore 693100
Code
Axcaliber 2 Knife Rebate Block 501124
Code
This cutter head is designed to accurately cut
rebates either from the top or bottom of the block.
It has two vertical knives and four shear blades
with four edges per blade. Also very useful for edge
planing boards, battens and mouldings. Maximum
rebate depth 20mm. Suitable for manual feed
(MAN). Cutting diameter 100mm, height 30mm,
bore 30mm.
Axcaliber 2 Knife Rebate Block
Axcaliber Shear Cutting
Rebate Cutter Head
Axcaliber 45deg
Chamfer Cutter Head
Chamfer cutter heads cut clean, accurate bevels,
chamfers and joints that are great for edge work.
Cutting diameter 150mm, bore size 30mm.
45° Chamfer Cutter Head 702477
Code
100mm Rebatting Cutter Head 501284
Code
Axcaliber 45deg
Lock Mitre Cutter Head
45° Lock Mitre Cutter Head 702467
Code
Euro lock mitre cutter head bits are ideal for milling
mitre joints in max 29mm stock. The quick and
easy way to accurately create boxes, stretcher bars,
frames and any assortment of right angle or parallel
joint projects. To produce perfectly fitting 45°
mitre joints in two steps: first with the workpiece in
horizontal position and then with the workpiece in
vertical position. To mill sturdy parallel glue joints
in two steps: first with the workpiece in horizontal
position with the inside face-down and then with
the inside face-up. Cutting diameter 140mm, bore
size 30mm.
These cutter heads have been designed for:
rebating from top and from bottom, jointing
and grooving in your spindle moulder machines,
double-end tenoner and edging machines. Perfect
in many materials, but a better result is achieved
using chipboard and MDF, wood composites, plastic
materials and laminates. Improved design with
shear angle. Cutting diameter 100mm, bore size
30mm.
Axcaliber Three Piece Adjustable
Grooving Set
Three Piece Adjustable Grooving Set 702478
Code
These cutter heads are the ideal tools to create
precision slots and grooves in materials from 4 to
15mm in depth by using the three piece adjustable
grooving set. This set includes: 2 x cutter heads type
(A) Z4 + V4, 1 x cutter head type (B) Z2, 11 x spacer
rings from 0.1 to 2mm. Cutting diameter 140mm,
bore size 30mm.
See our full range of accessories at: axminster.co.uk