Axis Q6045 User Manual Download Page 7 | Manualshive

Page: 7 / 69

background image

AXIS Q6045 PTZ Dome Network Camera

Hardware Overview

NOTICE

NOTICE

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the midspan shall
be shielded (STP) and intended for their specific use. Make sure that the midspan is properly grounded. For information about
regulatory requirements, see

Regulatory Information, on page 2

.

Multi-connector

Terminal connector for connecting external equipment:

•

Audio equipment

•

Input/Output (I/O) devices

•

AC/DC power supply

When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP
rating. For more information, see

Multi-Connector Cable (sold separately), on page 58

.

SD Card Slot

An SD card (not included) can be used for local recording with removable storage. For more information, see

Technical Specifications

.

NOTICE

NOTICE

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to

Setup > System

Options > Storage > SD Card

and click

Unmount

.

Control Button

The control button is used for:

•

Resetting the product to factory default settings. See

page 57

.

•

Connecting to an AXIS Video Hosting System service. See

page 50

. To connect, press and hold the button for about 1

second until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 50

. To connect, press and hold the button for about 3 seconds.

Power Button

Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See

page 57

.

LED Indicators

LED

Color

Indication

Unlit

Connection and normal operation

Amber

Steady during startup. Flashes during firmware upgrade.

Amber/red

Flashes amber/red if network connection is unavailable or lost.

Red

Flashes red for firmware upgrade failure.

Status

Green

Shows steady green for 10 seconds for normal operation after restart.

7

«
...
5
6
7
8
9
...
»

Summary of Contents for Q6045






































































Reviews:

No comments

Related manuals for Q6045

SMARTCAM SNH-1011N

Brand: Samsung Pages: 2

Brand: D3D Pages: 4

Brand: Samsung Pages: 1

iPOLiS SNP-3120

Brand: Samsung Pages: 1

Brand: Samsung Pages: 7

Brand: Samsung Pages: 23

iPOLiS SNP-3120

Brand: Samsung Pages: 2

iPolis SNO-5080R

Brand: Samsung Pages: 60

BEA LZR-WIDESCAN

Brand: Halma Pages: 20

Brand: µ-Dimension Pages: 32

Brand: STEINEL Pages: 24

Brand: HuddleCamHD Pages: 18

Brand: Vega Pages: 20

Brand: Clas Ohlson Pages: 44

SAPPHIRE COMPACT 309150001

Brand: Hygood Pages: 6

Brand: CAMERA LINK Pages: 36

GV-LPR CAM V2.0 Series

Brand: GeoVision Pages: 4

Brand: Speco Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands