AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide
Page 9
ENGL
IS
H
Connectors
Camera
SD card slot -
A standard or high capacity SD card (not included) can be used for local recording
with removable storage.
To insert and remove the SD card, the dome cover
must be removed, see
Install an SD Card (not
included),
on page 14.
To prevent corruption of recordings, the SD card should be unmounted before it is ejected.
To unmount, go to
Setup > System Options > Storage > SD Card
and click
Unmount.
Multi-connector -
Terminal connector for connecting the supplied media converter switch.
The supplied multi-connector cable is required in order to maintain the product’s IP rating.
Media Converter Switch
Network connector RJ-45 (external) -
Two RJ-45 connectors (10/100Base-T) for network
connectivity.
Power connector (DC input) -
2-pin terminal block for power input.
Function
Pin
Notes
Specifications
DC input
GND
1
Ground
12 V DC
2
Power in from power supply (sold
separately)
Max load = 7 A
12 - 13.2 V DC, min 75 W
Power connector (DC output) -
Two 2-pin terminal blocks for power
output (pin 4 is not used).
Function
Pin
Notes
Specifications
DC output
12 V DC
1-2
Power out to camera
Max load = 6.5 A
12 - 13.2 V DC, min 70 W
GND
3
Ground
N/a
4
N/a
- +
2
1
+ +
2
1
4
3
-
