AXIS Q6010-E Network Camera
Configure your device
Configure your device
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to
Replace the lens
1. Stop all recordings and disconnect power from the product.
2. Remove the lens.
3. Attach the new lens.
4. Reconnect the power.
5. Log in to the product’s webpage, go to
Settings
>
System
>
Orientation
>
Camera X
>
Lens selection
and select the
new lens.
6. Adjust the focus.
7. Do a positioning calibration of the camera.
Adjust the focus
To adjust the zoom:
1. Go to
Video > Installation
and use the zoom slider to adjust.
To adjust the focus:
1. Go to
Video > Installation
and click
to show the autofocus area.
2. Adjust the autofocus area to cover the part of the image that you want to be in focus.
If you don’t select an autofocus area, the camera focuses on the entire scene. We recommend that you focus on a
static object.
3. Click
Autofocus
.
4. To fine tune the focus, use the focus slider.
Select exposure mode
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control aperture, shutter
speed, and gain. Go to
Video > Image > Exposure
and select between the following exposure modes:
•
For most use cases, select
Automatic
exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select
Flicker-free
.
Select the same frequency as the power line frequency.
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select
Flicker-reduced
.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select
Hold current
.
5
