48
AXIS Q1755/-E - About
About
Here you can find basic information about your network camera. You can also view third party software licenses.
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the
System Options > Maintenance
web page (as described
in
Maintenance, on page 46
) or use the
Control button
on the side of the camera
(see page 5) as described below:
Using the Control Button
This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3. Keep the Control button pressed until the Status indicator displays amber (this may take up to 15 seconds).
4. Release the Control button. When the Status indicator displays green (which can take up to 1 minute) the process is
complete and the camera has been reset. All parameters are set to factory default value.
Note:
For other methods of setting the IP address, please refer to the product’s Installation Guide that accompanies the
product, or download a copy from www.axis.com
