AXIS Q1715 Block Camera
Additional settings
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Add the overlay text:
4. Go to
Settings > Overlay
.
5. Enter
#D
in the text field.
6. Choose text size and appearance.
Create a rule:
7. Go to
System > Events > Rules
and add a rule.
8. Type a name for the rule.
9. In the list of conditions, select AXIS Video Motion Detection.
10. In the list of actions, select
Use overlay text
.
11. Select
Camera 1
.
12. Type “Motion detected”.
13. Set the duration.
14. Click
Save
.
Record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and to
stop one minute after.
Note
The following instructions require that a microphone is connected to audio-in.
Turn on audio:
1. Set up the stream profile to include audio, see
Add audio to your recording on page 20
.
Turn on audio detection:
1. Go to
Settings > System > Detectors > Audio detection
.
2. Adjust the alarm level according to your needs.
Create a rule:
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
Audio
, select
Audio Detection
.
4. In the list of actions, under
Recordings
, select
Record video
.
5. Select the stream profile where audio has been turned on.
6. Set the prebuffer time to 5 seconds.
7. Set the postbuffer time to 60 seconds.
8. In the list of storage options, select
SD card
.
16
