AXIS Q1715 Block Camera
Additional settings
7. In the list of actions, under
Recordings
, select
Record video while the rule is active
.
8. Select a
Camera
.
9. Set the prebuffer time to 5 seconds.
10. Set the postbuffer time to 60 seconds.
11. Select where to save the recordings.
12. Click
Save
.
Set up the intrusion alarm
Before you start
•
Connect the intrusion alarm switch to pin 1 (ground) and pin 3 (digital I/O) of the camera’s I/O connector.
Configure the input port
1. Go to
Settings > System > I/O ports
.
2. For
Port 1
:
2.1 Select
Input
in the drop-down menu
.
2.2 Select
Closed circuit (NC)
in the drop-down menu
.
Create a rule
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
I/O
, select
Digital input
.
4. In the list of ports, select
Input 1
.
5. In the list of actions, under
Notifications
, select
Send notification to email
.
6. Select a recipient from the list or go to
Recipients
to create a new recipient.
To create a new recipient, click
. To copy an existing recipient, click
.
7. Type a subject and a message for the email.
8. Click
Save
.
Detect tampering with input signal
This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the
I/O connector, see
.
18
