Axis Q1715 User Manual Download Page 32

Page: 32 / 35

AXIS Q1715 Block Camera

Specifications

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see

axis.com

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are

trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

The control button is used for:

•

Resetting the product to factory default settings. See

Reset to factory default settings on page 27

PoE class switch

Use the switch to select the PoE class you want the device to use. Select PoE class 3 if you’re mounting the camera in an outdoor
housing that supports it.

Important

When using PoE class 3, HDMI and SDI are turned off.

Connectors

BNC connector

The BNC connector is used for connecting broadcast equipment using SDI. Connect a 75 Ohm coaxial SDI cable.

CAUTION

The connector may be hot during normal operation in elevated ambient temperatures.

HDMI connector

Use the HDMI

connector to connect a display or public view monitor.

Network connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

Audio connector

•

Audio in

– 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).

Summary of Contents for Q1715




































Search results

Summary of Contents for Q1715

Reviews:

Related manuals for Q1715

Brands by name

Popular brands

Axis Q1715, User Manual

Search results

Summary of Contents for Q1715

Reviews:

Related manuals for Q1715

Brands by name

Popular brands