AXIS Q1715 Block Camera
Additional settings
3. In the list of conditions, select
Tampering
.
4. In the list of actions, select
Send notification to email
.
5. Select a recipient from the list or go to
Recipients
to create a new recipient.
To create a new recipient, click
. To copy an existing recipient, click
.
6. Type a subject and a message for the email.
7. Click
Save
.
Audio
Add audio to your recording
Turn on audio:
1. Go to
Settings > Audio
and turn on
Allow audio
.
2. Go to
Input > Type
and select your audio source.
Edit the stream profile which is used for the recording:
3. Go to
Settings > Stream
and click
Stream profiles
.
4. Select the stream profile and click
Audio
.
5. Select the checkbox and select
Include
.
6. Click
Save
.
7. Click
Close
.
Connect to a network speaker
Network speaker pairing allows you to use a compatible Axis network speaker as if it is connected directly to the camera. Once
paired, the speaker acts as an audio out device where you can play audio clips and transmit sound through the camera.
Important
For this feature to work with a video management software (VMS), you must first pair the camera with the network speaker,
then add the camera to your VMS.
Pair camera with network speaker
1. Go to
Settings >System > Accessories > Network speaker pairing
.
2. Type the network speaker’s IP address, username and password.
3. Click
Connect
. A confirmation message appears and
Use speaker pairing
is turned on.
4. Go to
Settings > Audio
.
5. Turn on
Allow audio
.
6. Make sure that audio mode is set to
Half duplex
or
Simplex - Network Camera speaker only
. Otherwise, the camera will
not communicate with the network speaker.
20
