manualshive.com logo in svg

Axis OfficeBasic USB Wireless G, User Manual, Page: 31 / 43

Share
Download
Axis OfficeBasic USB Wireless G User Manual Download Page 31

Upgrading the Print Server’s Firmware

AXIS OfficeBasic USB Wireless G

31

Upgrading the Print Server’s Firmware

The print server’s firmware* is stored in its Flash memory. This memory retains 

data content even after the power is removed. Flash memory allows data to be 
erased and re-written, which is why you can install firmware updates in your 
print server as they become available, without having to replace any parts. New 
firmware can simply be loaded into the AXIS OfficeBasic USB Wireless G over 
the network.

You can obtain all print server firmware free of charge from the following 
locations:

•

www.axis.com

•

your local dealer

Caution!

Upgrading the Firmware

You can upgrade the AXIS OfficeBasic USB Wireless G firmware from the print 
server’s internal Web pages (HTTP).

* Firmware is internal print server software that determines its functionality.

•

Be careful not to interrupt the file transfer. If the transfer is interrupted, 
the print server may have to be re-initialized by your dealer.

•

Before upgrading the print server, ensure that it is not printing jobs. You 
have to wait until the print job is finished before you can proceed.

Updating instructions are supplied with the firmware release notes.

Summary of Contents for OfficeBasic USB Wireless G












































Reviews:

No comments