Axis M4308-PLE User Manual Download Page 29

Page: 29 / 61

AXIS M4308-PLE Panoramic Camera

The device interface

Stream

Encoding

: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If

audio input is tuned off, click

Enable audio input

to turn it on.

Audio mixer

Input

Ten Band Graphic Audio Equalizer

: Turn on to adjust the level of different frequency bands within an audio signal.

Voice enhancement

: Turn on to adjust the voice content in relation to other sounds.

Recordings

Click to filter the recordings.

From

: Show recordings done after a certain point in time.

: Show recordings up until a certain point in time.

Source

: Show recordings based on source.

Event

: Show recordings based on events.

Storage

: Show recordings based on storage type.

Click to play the recording.

Click to stop the recording.

Click to show more information and options about the recording.

Set export range

: If you only want to export part of the recording, enter from when to when.

Click to delete the recording.

Export

: Click to export (part of) the recording.

Apps

Add app

: Click to install a new app.

Find more apps

: Click to go to an overview page of Axis apps.

The context menu contains:

•

App log

: Click to view a log of the app events. The log is helpful when you contact support.

•

Activate license with a key

: If the app requires a license, you need to activate it. Use this option if your device

doesn’t have internet access.

Summary of Contents for M4308-PLE






























































Search results

Summary of Contents for M4308-PLE

Reviews:

Related manuals for M4308-PLE

Brands by name

Popular brands

Axis M4308-PLE, User Manual

Search results

Summary of Contents for M4308-PLE

Reviews:

Related manuals for M4308-PLE

Brands by name

Popular brands