Axis M4308-PLE User Manual Download Page 58

Page: 58 / 61

AXIS M4308-PLE Panoramic Camera

Specifications

Product overview

Microphone

IR illumination

Lid

I/O connector

Status LED indicator

Control button

SD card slot

Network connector (PoE)

LED indicators

Note

The Status LED can be configured to flash while an event is active.

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

Red

Firmware upgrade failure.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards.

Summary of Contents for M4308-PLE






























































Search results

Summary of Contents for M4308-PLE

Reviews:

Related manuals for M4308-PLE

Brands by name

Popular brands

Axis M4308-PLE, User Manual

Search results

Summary of Contents for M4308-PLE

Reviews:

Related manuals for M4308-PLE

Brands by name

Popular brands