Axis M4308-PLE User Manual Download Page 48 | Manualshive

Page: 48 / 61

background image

AXIS M4308-PLE Panoramic Camera

Learn more

Learn more

View area

A view area is a cropped part of the full view. You can stream and store view areas instead of the full view to minimize bandwidth
and storage needs. If you enable PTZ for a view area, you can pan, tilt and zoom within it. By using view areas you can remove parts
of the full view, for example, the sky.

Capture modes

The capture mode to choose depends on the requirements for the frame rate and resolution for the specific surveillance setup. For
specifications about available capture modes, see the product’s datasheet at

Privacy masks

A privacy mask is a user-defined area that covers a part of the monitored area. In the video stream, privacy masks appear either as
blocks of solid color or with a mosaic pattern.

You’ll see the privacy mask on all snapshots, recorded video, and live streams.

You can use the VAPIX® application programming interface (API) to turn off the privacy masks.

Important

If you use multiple privacy masks it may affect the product’s performance.

Note

Privacy masks may appear warped in some view modes.

Overlays

Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,
or during product installation and configuration. You can add either text or an image.

Streaming and storage

Video compression formats

Decide which compression method to use based on your viewing requirements, and on the properties of your network. The
available options are:

Motion JPEG

Motion JPEG, or MJPEG, is a digital video sequence that is made up of a series of individual JPEG images. These images are then
displayed and updated at a rate sufficient to create a stream that shows constantly updated motion. For the viewer to perceive motion
video the rate must be at least 16 image frames per second. Full motion video is perceived at 30 (NTSC) or 25 (PAL) frames per second.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image
contained in the stream.

H.264 or MPEG-4 Part 10/AVC

Note

H.264 is a licensed technology. The Axis product includes one H.264 viewing client license. To install additional unlicensed
copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller.

48

«
...
46
47
48
49
50
...
»

Summary of Contents for M4308-PLE






























































Reviews:

No comments

Related manuals for M4308-PLE

Brand: Samsung Pages: 149

Brand: Samsung Pages: 2

Brand: Samsung Pages: 88

NV40 - Digital Camera - Compact

Brand: Samsung Pages: 100

NV40 - Digital Camera - Compact

Brand: Samsung Pages: 100

NV30 - Digital Camera - Compact

Brand: Samsung Pages: 100

NV20 - Digital Camera - Compact

Brand: Samsung Pages: 102

NV24 - HD Digital Camera

Brand: Samsung Pages: 144

NV10 - Digital Camera - Compact

Brand: Samsung Pages: 78

Brand: Samsung Pages: 87

L830 - Digital Camera - Compact

Brand: Samsung Pages: 111

Brand: Samsung Pages: 128

Brand: Samsung Pages: 108

Brand: Samsung Pages: 118

Brand: Samsung Pages: 12

NV24 - HD Digital Camera

Brand: Samsung Pages: 97

L200 - Digital Camera - Compact

Brand: Samsung Pages: 102

Brand: Samsung Pages: 113

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands