Axis M1065-LW User Manual Download Page 60 | Manualshive

Page: 60 / 74

background image

AXIS M1065-LW Network Camera

About system options

Note

All AXIS Video MIB traps are enabled when SNMP v1/v2c traps are enabled. It is not possible to turn on or off specific traps.

SNMP v3

provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see

HTTPS on page 50

. To enable SNMP v3, check the box and provide the initial user

password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

to reset to factory default settings on page 64

.

UPnP

TM

The Axis product includes support for UPnP

TM

. UPnP

TM

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

TM

can be disabled under

System Options > Network > UPnP

.

RTP/H.264

The RTP port range and multicast settings are configured under

System Options > Network > RTP

.

The RTP port range defines the range of ports from which the video/audio ports are automatically selected. For multicast streams,
only certain IP addresses and port numbers should be used.

Select

Always Multicast Video

and/or

Always Multicast Audio

to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating
systems and clients that support this protocol.

Bonjour can be disabled under

System Options > Network > Bonjour

.

Storage

About SD cards

NO

NO

NOTICE

TICE

TICE

To prevent data corruption, the SD card should be unmounted before removal.

Note

For SD card recommendations see

www.axis.com

Note

Do not insert or eject the SD card while the product is running. The product will lose its connection to the wireless network.
Reboot the product to reestablish the wireless connection after the card has been inserted or ejected.

The Axis product supports microSD/microSDHC/microSDXC cards.

The following SD card file systems are supported:

•

ext4

— recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access

data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•

vFAT

— supported by most operating systems for personal computers.

60

«
...
58
59
60
61
62
...
»

Summary of Contents for M1065-LW











































































Reviews:

No comments

Related manuals for M1065-LW

Brand: Canon Pages: 3

Brand: Papago Pages: 82

Brand: California Labs Pages: 8

Brand: e-con Systems Pages: 21

Brand: e-con Systems Pages: 24

Brand: Canon Pages: 860

Brand: Olympus Pages: 148

Brand: Canon Pages: 164

PowerShot SD1200 IS Digital ELPH

Brand: Canon Pages: 41

E-330 - Evolt E330 7.5MP Digital SLR Camera

Brand: Olympus Pages: 116

CAMEDIA C-60 Zoom

Brand: Olympus Pages: 2

Brand: Canon Pages: 132

CAMEDIA C-5500 Sport Zoom

Brand: Olympus Pages: 2

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

Brand: Olympus Pages: 68

Brand: Chang Rui Technology Pages: 40

Brand: AG Neovo Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands