Axis M1065-LW, User Manual

Page: 35 / 74

AXIS M1065-LW Network Camera
AXIS Video Motion Detection
AXIS Video Motion Detection
AXIS Video Motion Detection is an application that detects moving objects in the camera’s field of view. When a moving object
is detected, AXIS Video Motion Detection sends an alarm that can be used by the Axis product or by third-party software to
for example, record video or send a notification.
AXIS Video Motion Detection 3 is included with the Axis product and is available under Setup > Applications . To use AXIS Video
Motion Detection, the application must first be started. To avoid detecting unwanted objects, the application should be configured.
During configuration, visual confirmation can be used to help understand the effect of the different filters. When visual confirmation
is enabled, red polygons show which objects the application detects and green polygons show which objects the application ignores.
Considerations
Before using AXIS Video Motion Detection 3, take the following into consideration:
Before using AXIS Video Motion Detection 4, take the following into consideration:
Before using AXIS Digital Autotracking, take the following into consideration:
• Small and distant objects might not be detected.
• Small and distant objects might not be tracked.
• Detection accuracy may be affected by weather conditions such as heavy rain or snow.
• Make sure that the lighting conditions are within the Axis product’s specification. Add additional lighting if needed.
• Make sure that the camera is not subject to excessive vibrations. Vibrations might cause false detections.
• Make sure that the camera is not subject to excessive vibrations. Vibrations might cause false detections and unwanted
tracked objects.
Start and Stop the Application
To start the application, select it in the Installed Applications list on the Applications page and click Start .
To stop the application, select it in the list and click Stop .
Configure Application
The application is available from Setup > Applications > Motion Detection 3Setup > Applications > Motion Detection 4 . Go to
Settings and then click AXIS Video Motion Detection settingsSetup to open the application’s webpage.
To configure AXIS Video Motion Detection 3, follow these steps:
To configure AXIS Video Motion Detection 4, follow these steps:
To configure AXIS Digital Autotracking, follow these steps:
1. Modify the size and position of the include area. This is the area in which moving objects will be detected. See Include
Area on page 36 .
2. Modify the size and position of the include area. This is the area in which moving objects will be tracked. See Include Area
on page 36 .
3. Optionally, add one or more exclude areas. Objects in an exclude area will be ignored. See Exclude Area on page 36 .
4. Click Save to apply the changes.
5. Use visual confirmation to verify the settings. See Visual Confirmation on page 37 .
35