Axis DV425, Instruction Manual

Page: 49 / 60

49
Trigger Level: There are 3 options of Trigger Level , the options “Low” and ” High” are used for turning
on alarm function. “Low” is generally used for debugging while “High” will be selected to turn on alarm
function for on road use. “Off” means turn off alarm trigger function.
Duration:
Duration of alarm video recording
Alarm Out-Buzzer: Set the Buzzer ON, it would beep for 5 seconds when alarming.
Alarm Out-Output1: Set it ON, 12V level output would come from the alarm wire of Output 1.
Alarm Out-Output2: Set it ON, 12V level output would come from the alarm wire of Output 1.
Display: A full screen of one channel will display when the channel is triggered.
Priority: Set priorities for Alarm1~Alarm4, Reverse, Brake, Left, and Right.
When different types of alarm are triggered at the same time, alarms with the highest priority will
work first.
Click, the priority value of the selected alarm will be added by 1. The bigger the value, the
lower the priority.
Click, the priority value of the selected alarm will be reduced by 1. The smaller the value, the
higher the priority.