Axis Camera Station Page 7 User Manual Download

Page: 7 / 78

AXIS Camera Station Installation

AXIS Camera Station User’s Manual

Activate the software with your License Key

Registering with a direct Internet connection

Important!

1. The first time you start the program you will be asked to register your

license. Click

Register

2. Fill in the requested information, you will find your

License Key

on the inside

of the AXIS Camera Station CD casing, to the left. Click

Activate.

3. Your license information will be sent to Axis Communications and your

software will be automatically activated.

4. You can now start using AXIS Camera Station.

• The License Key can only be used to install the software on a single com-

puter.

• The License Key is your proof of purchase, keep it in a safe place for future

reference.

Enter

License Key

found on inside of CD

The characters are
case-sensitive.

casing!

Summary of Contents for Camera Station















































































Search results

Summary of Contents for Camera Station

Reviews:

Related manuals for Camera Station

Brands by name

Popular brands

Axis Camera Station, User Manual

Search results

Summary of Contents for Camera Station

Reviews:

Related manuals for Camera Station

Brands by name

Popular brands