OPERATION MANUAL BD/TL
29
__________________________________________________________________________________________________________________
- dAtA_b
EdIt
inscribing number/code (MODE key switches) of the part to edit,
dELOnE
inscribing number/code (MODE key switches) parts to delete,
confirmation YES/no,
dELALL
deleting all parts, confirmation YES/no.
Products edition enables to define:
- PA Id – detail number inscribing,
- APW – unitary mass,
- SAMPL – default sample quantity,
- PtArE – inscribing constant tare to detail,
- thr Lo – low threshold value,
- thr Hi – upper threshold value,
- thr Zr – zero threshold value,
- SAVE – saving settings.
- USErS
Id 1
view/edition user identifier 1,
Id 2
view/edition user identifier 2,
Id 3
view/edition user identifier 3,
Id 4
view/edition user identifier 4,
Id 5
view/edition user identifier 5.
- SEtuP
AutotA
turning on (On) or off (OFF) autotare,
CALIb
scale calibration (available in not verificated scales):
Following options will appear:
-CAL on – calibration without successive steps confirmation,
-CAL StP – calibration with successive steps confirmation,
out – exit from calibration.
Press ENTER key when CAL StP is displayed. Inscribe (confirm using ENTER)
standard of mass value that will be used for calibration.
Wait until scale zero inscribes (if CAL StP option is chosen press MENU key
when PrESS MENU communicate appears).
After LOAD communicate appears put standard of mass (if CAL StP option is
chosen press MENU key when PrESS MENU communicate appears).
