OPERATION MANUAL BD/TL
15
__________________________________________________________________________________________________________________
12.
Start of work
Leave the pan empty, plug the feeder to the mains (~230V/50Hz) and plug the
feeder connector to the 12V power socket at the bottom side of the scale.
Scale will execute following step:
- display type of scale and version of program,
-
zeroing the indication.
After displaying an indication on the upper display section scale is ready to work.
13.
Pieces counting (PCS)
Scale enables to count identical pieces, e.g. turnbuckles or buttons.
Measurement with unitary weight calculated from given sample:
A measurement is performed in two phases:
- first phase - single piece weight calculation on the basis of defined pieces amount
(default is 10 pieces.),
- second phase – pieces counting
1. Put on pan quantified details sample.
2. Turn on pieces counting by pressing
PCS+
key
.
3.
Place 10 then press Enter
communicate will appear. If the quantified sample
consists 10 pieces press
ENTER
. If amount of detail is other write correct value
by using numeric keys and press
ENTER
.
4. Number of details is diplayed on lower section of display with
PCS
indicator
.
A single piece mass is displayed in middle section with
APW
indicator.
5. Remove sample form pan and put a portion of pieces to count.
6. Result of calculation is read from lower section display.
◄
◄
◄
Place
10
then
