OPERATION MANUAL BD/TL
17
__________________________________________________________________________________________________________________
Change/write a unitary mass using numeric keys:
During pieces counting (indicator
PCS
) user can change actual sample mass.
Writing a sample mass when counting process is turned-off initiates counting
process.
1.
Press
SPW
key
.
2.
Write sample mass using
numeric keys
and press
ENTER
.
3. Number of details is displayed on lower display section with
PCS
indicator
.
A
unitary mass is displayed in middle display section with
APW
indicator
.
The
upper display section displays sample mass.
4. Result of calculation is read from lower display.
Note:
1. It is advised that single piece weight is not less than one reading unit and
sample weight used in first phase is bigger than 100 reading units
.
2. If the unit mass (APW) is smaller than scale readout unit but bigger than 1/10
of readout unit, a APW LOW communicate appears and the counting result
blinks. If the unit mass is smaller than 1/10 of readout unit, APW to LOW
communicate appears and pieces counting is disabled.
SPW
_
g
