Axis AXIS USB User Manual Download Page 50

Page: 50 / 61

Technical Specification

AXIS OfficeBasic USB User’s Manual

Section 11

Technical Specification

Supported Printers

USB printers. Not compatible with Windows GDI printers.

Supported Systems

Microsoft Windows:

Windows NT ver 4.0, Windows 98, Windows 2000, Windows Me, Windows XP.
Print Methods: NetBEUI, LPR, Raw TCP.

Additional Systems:

All computers supporting the TCP/IP suite of protocols.

Apple EtherTalk:

Print Method: AppleTalk Phase 2.

WWW:

Netscape Communicator 4.7 and above, Internet Explorer 4.0 and above,
Mozilla 1.0 and above.

Supported Protocols

Windows:

NetBIOS/NetBEUI or TCP/IP.

TCP/IP:

LPR, FTP, ARP, RARP, DHCP, ICMP, IGMP, IP, TCP, UDP, HTTP, TFTP, SLP, Raw TCP,
AutoIP, DDNS.

Apple EtherTalk:

AAPR, ATP, DDP, NBP, PAP, RTMP, ZIP.

Supported Languages

English, French, German, Spanish and Italian.

Logical Connection

Ethernet:

Use of IEEE 802.2, IEEE 802.3, SNAP and Ethernet II frame types simultaneously.

Fast Ethernet:

Supports NWay that provides auto-detection of network speed. Use of IEEE
802.2, IEEE 802.3, SNAP and Ethernet II frame types simultaneously, full duplex.

Wired Network

Attachments

Ethernet:

RJ-45 connector (Category 5 twisted pair cable) for 10baseT Ethernet or
100base TX Fast Ethernet.

Printer Ports

One USB printer port.

Summary of Contents for AXIS USB






























































Search results

Summary of Contents for AXIS USB

Reviews:

Brands by name

Popular brands

Axis AXIS USB, User Manual

Search results

Summary of Contents for AXIS USB

Reviews:

Brands by name

Popular brands