manualshive.com logo in svg

Axis AXIS USB, User Manual

Share
Download
Axis AXIS USB User Manual Download Page 10

Product Overview

10

AXIS OfficeBasic USB User’s Manual

Test Button

The test button is used for:

•

printing a test page

 to check the connection to the printer

•

printing the parameter list

 showing the print server settings

•

performing a Factory Default of 

the print server, which will restore 

most of the parameters and settings to factory default values

Network Indicator

The network indicator flashes to indicate network activity.

Power Indicator

The power indicator is lit while power is applied. If it is not lit, or if it 

flashes, there is a problem with the print server or its Power Adapter. 

Mounting the Print Server

Using the supplied clips, your AXIS OfficeBasic USB can be mounted in 

many ways, e.g. on the back of the printer, on the side of the printer or on 

a wall. It can be placed behind the printer or next to a hub.

Adhesive Holder

Fasten to mounting surface with screw or by peeling off adhesive tape.

Adhesive Clip

Fasten to print server by peeling off adhesive tape.

Summary of Contents for AXIS USB






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands