Axis 2N LTE Verso, Configuration Manual

Page: 196 / 211

2N TELEKOMUNIKACE a.s., www.2n.cz 196/211
Update Result (Private Config) – private configuration follows the common
configuration update. The device with private configuration is identified by its
MAC address.
The following options are available: DHCP option 66 failed,
Firmware is up to date, Server connection failed, Running..., File not found.
Communication Result Detail (Private Config) – server communication error
code or TFTP/HTTP status code.
My2N / TR069
Use this tab to enable and configure remote intercom management via the TR-069
protocol. TR-069 helps you reliably configure intercom parameters, update and back
up configuration and/or upgrade device firmware.
The TR-069 protocol is utilised by the My2N cloud service. Make sure that TR-069 is
enabled and Active profile set to My2N to make your intercom log in to My2N
periodically for configuration.
This function helps you connect the intercom to your ACS (Auto Configuration
Server). In this case, the connection to My2N will be disabled in the intercom.
My2N / TR069 Enabled – enable connection to My2N or another ACS server.
select one of the pre-defined profiles (ACS), or choose a setting – Active profile
of your own and configure the ACS connection manually.
display the time period in which the intercom shall – Next synchronisation in
contact a remote ACS.
display the current ACS connection state or error state – Connection status
description if necessary.
Communication Status Detail – server communication error code or HTTP status
code.
– test the TR069 connection according to the set profile, see Connection test