Axis 2N LTE Verso, Configuration Manual

Page: 77 / 211

2N TELEKOMUNIKACE a.s., www.2n.cz 77/211
List of Parameters
Common Settings
Default video source – set the default video signal source. Choose Internal
camera (or an analogue camera connected to the intercom) or External IP
camera. The change of the default video signal source is applied to the RTSP
stream and HTTP API. In it is required to enable the external camera 2N IP Eye
®
manually, even when there is no internal camera present in the device. If no
internal camera is connected to the intercom, External IP camera can only be
selected. If the external camera is not connected or configured properly, N/A is
displayed on a blue background.
PTZ control enabled – enable the PTZ (Pan-Tilt-Zoom) function to control the
camera display area during the call via DTMF (
license required) Enhanced Video
from your IP phone numeric keypad. Click the * key to enable/disable the PTZ
mode. The meanings of the IP phone keys in the PTZ mode are as follows:
IP phone key PTZ mode function
* Enable/disable PTZ
1 Zoom in
3 Zoom out
2 Move zoom region up
4 Move zoom region to the left
6 Move zoom region to the right
8 Move zoom region down
5 Return to initial state