2N TELEKOMUNIKACE a.s., www.2n.cz
40/211
IP Eye address – set the address of the PC to be sent a special UDP message on
each active user phone number call. With the aid of this message, the 2N IP Eye
®
application displays the camera image screen for those users who are not
provided with a display-equipped videophone. Enter the address as follows:
domain[:
][:
], e.g.:
or 192.168.22.111. The
port1
port2
and
parameters are optional and are used in case there is Network
port1
port2
Address Translation (NAT) between the PC and intercom and the addresses
have to comply with the router or another NAT-executing device. The port1
(default value: 8003) parameter defines the destination port for the UDP
messages sent to
. The port2 (default value: 80) parameter defines
2N IP Eye
®
the destination port for the
– intercom HTTP communication.
2N IP Eye
®
Note
The 'IP Eye Address' function is available in selected
models
2N LTE intercom
only (refer to the model and licence overview).
When Enhanced Integration is not licensed on a device, it is possible to
control the locks only when a call is in progress. If a call with user, who has 2N
address filled in, is in progress, no licence is needed to control the
IP Eye
®
locks.
Tip
Tip
Video Tutorial: SW application for IP/LTE intercoms – 2N IP Eye
Parallel call to following number – enable group calling, i.e. calling to more phone
numbers at the same time. You can call the first two numbers, the last two
numbers, or all of the three user numbers in parallel. Answering one call
automatically terminates the other calls.
Summary of Contents for 2N LTE Verso
Page 1: ...www 2n cz 2N LTE Verso Modular LTE Intercom Configuration Manual Firmware 2 30 Version 2 30...
Page 21: ...2N TELEKOMUNIKACE a s www 2n cz 21 211 5 Intercom Configuration...
Page 181: ...2N TELEKOMUNIKACE a s www 2n cz 181 211...
Page 199: ...2N TELEKOMUNIKACE a s www 2n cz 199 211 General overview of local syslog messages...
