Axis 2N LTE Verso, Configuration Manual

Page: 133 / 211

2N TELEKOMUNIKACE a.s., www.2n.cz 133/211
IP address 1–4 – set up to 4 authorised IP addresses from which you can log in to
the RTSP server. If none of the four fields is completed, any IP address can be
used for login.
QoS DSCP value – set the audio/video RTP packet priority in the network. The
set value is sent in the TOS (Type of Service) field in the IP packet header.
UDP unicast enabled – enable audio/video stream sending via the RTP/UDP. If
this mode is off, the audio/video stream data are sent via the RTP/RTSP only.
Maximum video packet size – set the maximum size of the video packets to be
sent via the RTP/UDP.
Starting RTP port – set the starting local RTP port in the range of the length of
60 ports to be used for audio and video transmissions. The default value is 4800
(i.e. the used range is 4800–4859).
Jitter Compenstantion – set the buffer capacity for jitter compensation in audio
packet transmissions. A higher capacity improves the transmission resistance at
the cost of a greater sound delay.
Tip
FAQ: VLC Player - How to watch a video from 2N IP/LTE intercom RTSP
server
FAQ: VLC Player - How to record video from 2N IP/LTE intercom