Management and Configuration
AXIS 5400+ / AXIS 5600+ User’s Manual
87
Notes:
The example on the next page describes how to upload and download the
config
file using FTP from a DOS window.
Example:
Viewing
the
Account
File
The
account
file contains data concerning the ten last print jobs. It
specifies an internal job number, the user that initiated the job, the
protocol and logical printer that was used, current status (Completed, Off-
line, or Printing), number of bytes printed, elapsed time and off-line time.
Follow the instructions below to view the
account
file using FTP:
1. Log in to the Axis Network Print Server by typing:
ftp <host name>
or
ftp <IP address>
in a DOS windows or in a
UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
3. Download the
account
file to your host by typing:
get account
• It is important that the destination file is specified in capital letters. Otherwise the edits
are temporary and will be lost once the Axis Network Print Server has been powered off.
• To edit the
config
file from a Macintosh you will need FTP support such as MacTCP, Fetch
or Anarchie. The procedure for editing the file is the same as described above.
>
ftp npserver
connected to npserver.
220 AXIS 5600+ (rev 3) FTP Network Print Server V7.10
Nov 06 2006 ready.
User (npserver:(none)):
root
331 User name ok, need password
Password:
pass
(not visible)
230 User logged in
ftp>
get config
200 PORT command successful.
150 Opening data connection for config
(192,168,0,10,4,64), (mode ascii).
226 Transfer complete.
ftp: 10527 bytes received in 0.22Seconds 47.85
Kbytes/sec
ftp>
put config CONFIG
200 PORT command successful.
150 Opening data connection for CONFIG
(192,168,0,10,4,65), (mode ascii).
226 Transfer complete.
10527 bytes received in 0.22Seconds 47.85 Kbytes/sec
ftp>
bye
221 Goodbye.
>
