Configuration Possibilities
108
AXIS 5400+ / AXIS 5600+ User’s Manual
To enable these protocols, select
Admin | Network Settings | Detailed
View | TCP/IP Network
for FTP, Telnet, AutoIP, DHCP and BOOTP.
Remote Config is enabled via
Admin | General Settings | RConfig
Support
.
Important:
Checking
SSL/TLS Status
To check SSL/TLS status, open the print server’s Web interface and select
Admin
|
Network Settings
|
Detailed View
|
TCP/IP Network
to see if the
HTTPS Enabled
parameter is set to Yes or No.
To View a Certificate
To view a Certificate, open the print server’s Web interface, select
Admin
|
Security Settings | HTTPS
and click
View
next to the Certificate.
To Delete a Certificate
To delete a Certificate, open the print server’s Web interface, select
Admin
|
Security Settings | HTTPS
and click
Delete
next to the Certificate.
Enabling the SNMPv3 Protocol
Invoke the print server’s Web interface to enable the SNMPv3 protocol.
1. Select
Admin | Network Settings | Detailed View | TCP/IP Network
and
ensure that
HTTPS Enabled
is set to
yes
to guarantee a secure
configuration.
Note: You must have a valid certificate loaded to be able to enable HTTPS.
See
“Enabling SSL via the Web Interface”
on page 106.
To ensure maximum security, it is highly recommended that you change your Administrator
password after generating a certificate and disabling insecure protocols! This is done from
Admin | General Settings | Change => | General | Root Password.
