Configuration Possibilities
110
AXIS 5400+ / AXIS 5600+ User’s Manual
• Provide the path to the certificate, or use the browse button to
locate it. Then click the
Upload
button.
• To remove a certificate, click
Delete
.
Client Certificate/Client Private Key
- The Print server must also
authenticate itself, using a client certificate and a private key.
• Click
Upload
and provide the path to the certificate in the first field,
or use the
Browse
button to locate it and click
OK
.
• To remove a certificate, click the
Remove
button.
802.1X Protocol
Settings
1. Select
Admin | Security Settings | 802.1X.
2. Click
Detailed View
to configure the 802.1X EAP/TLS settings.
To configure and enable IEEE 802.1X, enter the following information:
1. Select
EAPOL version
(1 or 2), this must correspond to the EAPOL version
in your network switch.
2. Enter the user identity,
EAP identity,
associated with your certificate.
3. Enter the
Private key password
for your user identity.
4. If
Verify server certificate validity period
is enabled, the print server will
check that the certificate in the network switch is valid. If disabled, the level
of security will be lower as the print server will accept the certificate even
if it has expired.
5. Enter the
current date
for time validation. This is necessary in order to give
the print server the correct date at start up.
6. Select the
802.1X Enabled
radio button.
7. Click
OK
to save the settings.
Important!
Time/date validation requires that SNTP is enabled. To enable SNTP, go to
Network Settings | Detailed View | TCP/IP Network
and select the
SNTP
Enabled
radio button.
