manualshive.com logo in svg

Axis 2400/01, Administration Manual, Page: 61 / 87

Share
Download
Axis 2400/01 Administration Manual Download Page 61

AXIS 2400/2401 Admin Manual

Installation im Netzwerk

 

61 

Deut

sch

Überprüfen und Abschließen der Installation von Ihrem Browser aus

Wichtig!

• Bei Lieferung ist der AXIS 2400/2401 auf offenen Zugriff eingestellt (anonyme Benutzer). Das Gerät wird mit 

vorkonfiguriertem Benutzernamen und Kennwort geliefert, die auf "root" und "pass" eingestellt sind. Der 
Benutzername muss sofort geändert werden, um nicht-autorisierten Zugriff auf Admin Tools und/oder Bilder zu 
verhindern, wie in den Sicherheitseinstellungen erklärt. 

• Damit Bilder im Microsoft Internet Explorer aktualisiert werden, aktivieren Sie im Browser die 

ActiveX-Steuerung und installieren in einem einmaligen Vorgang die ActiveX-Komponente von Axis auf Ihrer 
Workstation. Wenn das Downloaden zusätzlicher Softwarekomponenten in Ihrer Arbeitsumgebung einge-
schränkt oder unzulässig ist, können Sie Ihren AXIS 2400/2401 auch so konfigurieren, dass die Bilder mit einem 
Java-Applet aktualisiert werden. Weitere Informationen zu diesem Thema finden Sie in der Online-Hilfe.

Netzwerkanzeige
(Network)

❺

Schließen Sie das externe Netzteil an die Einheit an, und 

verbinden Sie es mit Ihrem lokalen Stromnetz.

❼

Drücken Sie Strg+C, um den Ping-Befehl zu beenden. Die 

Installation ist jetzt abgeschlossen, und Sie können von 
Ihrem Web-Browser aus auf den AXIS 2400/2401 zugreifen. 
Dies wird im folgenden Abschnitt beschrieben.

❻

Etwa 10 - 15 Sekunden nach dem Anschluss an das Strom-

netz wird 

die Meldung

“Antwort von 172.21.1.200...”

(oder eine ähnliche Meldung) im DOS-Fenster angezeigt.
Vergewissern Sie sich, dass die

 Betriebsanzeige konstant 

leuchtet und

 

die Netzwerkanzeige in bestimmten Abständen 

Netzeil-
anschluss

Betriebsanzeige (Power)

❷

Klicken Sie auf die Schaltfläche “Installation Wizard” 

(Installationsassistent). Der Assistent führt Sie durch den 
weiteren Installationsvorgang.

❶

Starten Sie Ihren Web-Browser und geben 

Sie die IP-Adresse Ihres AXIS 2400/2401 in die 
Adresszeile ein, z. B. 172.21.1.200, wie nach-
folgend gezeigt.

Summary of Contents for 2400/01
























































































Reviews:

No comments