AXIOMTEK SHB100, User Manual

Page: 48 / 68

SHB100
LGA775 SBC User’s Manual
42 PHOENIX-AWARD BIOS Utility
On-Chip Primary PCI IDE
This option could allow you to enable or disable the primary and secondary IDE controller,
select Disabled if you want to add a Different hard drive controller.
IDE Primary Master PIO
This option could allow you to set up Master IDE interface from PIO mode0 to PIO Mode 4
IDE Primary Slave PIO
This option could allow you to set up Slave IDE interface from PIO mode0 to PIO Mode 4
IDE Primary Master UDMA
This option could allow you to enabled or disabled onboard Ultra DMA mode on Primary
Master
IDE Primary Slave UDMA
This option could allow you to enabled or disabled onboard Ultra DMA mode on Primary Slave
On-Chip Seconary PCI IDE
This option could allow you to enabled or disabled onboard Secondary PCI IDE controller
IDE Primary Master PIO
This option could allow you to set up Master IDE interface from PIO mode0 to PIO Mode 4
IDE Primary Slave PIO
This option could allow you to set up Slave IDE interface from PIO mode0 to PIO Mode 4
IDE Primary Master UDMA
This option could allow you to enabled or disabled onboard Ultra DMA mode on Primary
Master
IDE Primary Slave UDMA
This option could allow you to enabled or disabled onboard Ultra DMA mode on Primary Slave
On-Chip Serial ATA
This option could allow you to enabled or disabled onboard SATA port function
Combined Mode: This option allows you to use both IDE and SATA drives; allowing a
maximum od 4 drives-1 IDE Master; 1 IDE Slave and 2 SATA. You must manually set the SATA
and PATA drives mode in the “ PATA IDE Mode “ and “ SATA Port “ fields.
Enhanced Mode: This option allows you to use both IDE and SATA drives; allowing a
maximum of 6 drives
– 1 IDE Master, 1 IDE Slave and 4 SATA.
SATA Only: This option automatically sets the SATA drives to Primary Master mode. Since the
SATA drives are in Master mode, you can not set the IDE drive to Master mode.
PATA IDE Mode
This field is used to select the function mode for IDE 1 connector and its relation to the SATA
ports,
Primary IDE 1 serves as Primary Master and Primary Slave channel. SATA 2 and SATA
4 serves as Secondary Master and Secondary Slave channel. SATA 1 and
SATA 3 are disabled.
Secondary
IDE 1 serves as Secondary Master and Secondary Slave channel. SATA 1 and
SATA 3 serves as Primary Master and Primary Slave channel. SATA 2 and
STATA 4 are disabled.