SBC856A1 Series All-in-One POS Board User’s Manual
Award BIOS Utility
49
Always On
Monitor will remain on during power saving modes.
Suspend --> Off
Monitor blanked when the system enters the
Suspend mode.
Susp, Stby --> Off
Monitor blanked when the system enters either
Suspend or Standby modes.
All Modes --> Off
Monitor blanked when the system enters any power
saving mode.
z
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC +
Blank
This causes the system to turn off the vertical and
horizontal synchronization ports and write blanks to the
video buffer.
DPMS
Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the
Video Electronics Standards to select video power
management values.
Blank Screen
This option only writes blanks to the video buffer.
z
Video Off Method
In suspending, this item is to select the CRT closed method under APM
mode.
The choice: Blank Screen, V/H SYNC+Blank, DPMS
z
MODEM Use IRQ
APM 1.2 function used only.
The choice: NA, 3, 4, 5, 7, 9, 10, 11
z
Soft-off by PWRBTN
This only works with the system using an ATX power supply. It also allows
user to define the type of soft power OFF sequence for the system to follow.
Instant-Off
(default)
This option follows the conventional manner systems perform
when power is turned OFF. Instant-Off is a soft power OFF
sequence requiring only the switching of the power supply
button to OFF.
Delay 4
Sec.
Upon turning OFF system from the power switch, this option will
delay the complete system power OFF sequence by
approximately 4 seconds. Within this delay period, system will
temporarily enter into Suspend Mode enabling you to restart the
system at once.
