AXIOMTEK MANO882 series, User Manual

Page: 16 / 94

MANO882 Series Mini ITX Board
10 Board and Pin Assignments
2.3.5 LVDS +12V Voltage Selection (JP7) (Optional)
The board supports voltage selection for flat panel displays. Use JP7 to set LVDS
connector (CN19) pin 1~6 VCCM to +12V level. To prevent hardware damage, before
connecting please make sure that the input voltage of flat panel is correct.
2.3.6 LVDS +3.3V/+5V Voltage Selection (JP8)
The board supports voltage selection for flat panel displays. Use JP8 to set LVDS
connector (CN19) pin 1~6 VCCM to +3.3V or +5V. To prevent hardware damage, before
connecting please make sure that the input voltage of flat panel is correct.
2.3.7 Auto Power On (JP9)
If this jumper is enabled for power input, the system will be automatically power on
without pressing soft power button. If this jumper is disabled for power input, it is
necessary to manually press soft power button to power on the system.
Note
This function is similar to the feature of power on after power failure,
which is controlled by hardware circuitry instead of BIOS.
2.3.8 PCI-Express Bifurcation Setting (JP10)
JP10 is for PCI-Express bifurcation setting. See table below for detailed information.
Function Setting
+12V level 1-2 close
NA (Default) 1-2 open
Function Setting
+3.3V (Default) 1-2 close
+5V 2-3 close
Function Setting
Disable auto power on (Default) 1-2 close
Enable auto power on 2-3 close
Function Setting
Set CN15 to one x16 PCI-Express (Default) 1-2 close
Set CN15 to two x8 PCI-Express 2-3 close