AXIOMTEK MANO882 series, User Manual

Page: 14 / 94

MANO882 Series Mini ITX Board
8 Board and Pin Assignments
2.3 Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to MANO882 Series, please make sure all of the jumpers are in factory
default position. Below you can find a summary table and onboard default settings.
Note
Once the default jumper setting needs to be changed, please do it under power-off
condition.
Jumper Description Setting
JP1
Audio Output Selection
Default: Line-out
1-3, 2-4 Close
JP2
COM2 Data/Power Selection
Default: RS-232 Data
CN3B Pin 1: DCD 3-5 Close
CN3B Pin 9: RI 4-6 Close
JP3
COM1 Data/Power Selection
Default: RS-232 Data
CN3A Pin 1: DCD 3-5 Close
CN3A Pin 9: RI 4-6 Close
JP5
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close
JP6
LVDS Brightness Control Mode Setting
Default: PWM Mode
1-2 Close
JP7 (Optional)
LVDS +12V Voltage Selection
Default: NA
1-2 Open
JP8
LVDS Voltage Selection
Default: +3.3V level
1-2 Close
JP9
Auto Power On
Default: Disable
1-2 Close
JP10
PCI-Express Bifurcation Setting
Default: One x16 PCI-Express
1-2 Close