AXIOMTEK eBOX550-100-FL Series, User Manual

Page: 42 / 78

eBOX550-100-FL Series U
ser’s Manual
Jumper Setting & Connector
32
3.2.1 Restore BIOS Optimal Defaults (JP1)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1 -2. Doing this
procedure can restore BIOS optimal defaults.
3.2.2 Auto Power On (JP11)
If JP11 is enabled for power input, the system will be automatically power on without
pressing soft power button. If JP11 is disabled for power input, it is necessary to
manually press soft power button to power on the system.
1
2
Note:This function is similar to the feature of power on after power failure, which is controlled
by hardware circuitry instead of BIOS.
Function Setting
Normal (Default) 1-2 close
Restore BIOS optimal defaults 2-3 close
Function Setting
Disable auto power on (Default) 1-2 close
Enable auto power on 1-2 open