AXIOMTEK eBOX550-100-FL Series, User Manual, Page: 3 / 78

iii
Safety Precautions
Before getting started, please read the following important safety precautions.
1. User should not modify any unmentioned jumper setting without Axiomtek FAE
’
s
instruction. Any modification without instruction might cause system to become
damage
2. The eBOX550-100-FL does not come equipped with an operating system. An
operating system must be loaded first before installing any software into the
computer.
3. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in
any static-shielded devices. Most electronic components are sensitive to static
electrical charge.
4. Disconnect the power cord from the eBOX550-100-FL before making any
installation. Be sure both the system and the external devices are turned OFF.
Sudden surge of power could ruin sensitive components. Make sure the eBOX550-
100-FL is properly grounded.
5. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
6. Turn OFF the system power before cleaning. Clean the system using a cloth only.
Do not spray any liquid cleaner directly onto the screen.
7. Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20
℃
or above 80
℃
. It may damage the equipment.
8. Do not open the system
’
s cover. If opening the cover for maintenance is a must,
only a trained technician is allowed to do so. Integrated circuits on computer
boards are sensitive to static electricity. To avoid damaging chips from
electrostatic discharge, observe the following precautions:

Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.

When handling boards/components, wear a wrist-grounding strap, available
from most electronic component stores.