UMAX141520 Version 1B
8-19
3.1 Show Configuration Parameter
Press ‘1’ to see the Configuration parameters. This option will show Serial Number, Converter Mode,
Converter Speed, and Log Timing.
If the converter
Mode is “Master”, it shows that Automotive Ethernet PHY is configured to work as Master. If
the converter
Mode is “Slave”, it shows that Automotive Ethernet PHY is configured to work as Slave.
Speed shows the speed of both PHYs.
Log Timing is used to see the Power and (Ethernet and Automotive Ethernet) Link logs over RS-232. Logs
are used for debugging and testing purposes. Log Timing does not affect the
Converter’s working and
Master-Slave or Speed configuration of PHYs.
Figure 6 Show Configuration Parameter
